• Details

TS1621 4.75 GPM 2500 PSI 1450 RPM 24mm

FEATURES:

  • The preferred pump frame in the cleaning industry
  • Forged brass manifold with an exdlusive lifetime warranty
  • Large capacity, die cast, anodized aluminum oil bath crankcase
  • Over sized connecting rods for maximum life
  • Heavy duty tapered roller bearing
  • Solid ceramic plungers with continuously lubricating packings
  • Unitized stainless steel inlet and discharge valves
  • Available in left handed "L" version

SPECIFICATIONS

  • Triplex Plunger Pump
  • Maximum Volume: 4.75 GPM
  • Maximum Discharge Pressure: 2500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1450 RPM
  • Minimum Horsepower Requirements: 8 bhp (12.2 hp for gas engines)
  • Bore: .866" (22mm)
  • Stroke: .472" (12mm)
  • Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port Thread: 1/2" FPT
  • Discharge Port Thread: 3/8" FPT
  • Shaft Diameter: .945" (24mm)
  • Dimensions: 12.2" x 9.2" x 6.9"
  • Weight: 32 lb.

Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.

Thank you for browsing our selection of pressure washers, steam cleaners and accessories.

We have the tools you need to effectively use and maintain your pressure washer.  Quick connect and rotating turbo nozzles are available in various sizes and configurations.  It's important to use the proper size nozzle for your pressure washer.  Nozzles are sized by looking at the PSI and GPM of your pressure washer.  Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required.  Pressure washer pumpsunloaders, and motors should match the specifications of your particular machine.  Hot pressure washers and steam cleaners require additional components like burnersignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas.  Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards.  Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasters can be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.

 

Specifications

PSI 2500
RPM 1450
Shaft Size 24mm
GPM 4.75

You May Also Consider